- Details
-
Category: How to Guides
-
Published: 14 July 2017
-
Hits: 8403
ADSL2 Modem modem/router settings for common Australian providers: (UNDER REVIEW USE WITH CARE)
Telstra Business Broadband ADSL2:
| Username |
|
This email address is being protected from spambots. You need JavaScript enabled to view it. |
| Password |
|
[as provided] |
| VPI/VCI |
|
8/35 |
| Protocol/Encapsulation |
|
PPPoA/VC Mux (PPPOE/LLC should work also) |
| Authentication method |
|
CHAP |
| MTU |
|
Default (or 1492) (note some information says 1500) |
| Dynamic/static IP |
|
Dynamic (This a prefrence on my part not a requirment, it should receive the same "static" IP automaticly each time you could set it for a static IP as provided by the ISP) |
| WAN IP |
|
Blank (dynamic) |
| Primary DNS |
|
139.130.4.4 |
| Secondary DNS |
|
203.50.2.71 |
Telstra Business FTTN NBN:
| Username |
|
This email address is being protected from spambots. You need JavaScript enabled to view it. |
| Password |
|
[as provided] |
| VPI/VCI |
|
TBA |
| |
|
|
Exetel FTTN NBN:
| Username |
|
TBA |
| Password |
|
[as provided] |
| VPI/VCI |
|
TBA |
| |
|
|
More to follow...
This blog post has been provided for the benefit of digitalwelcomemat IT customers.
Treat this information as informative only and do not take actions or make decisions on the basis of the information contained here. All IT decisions and actions should be made after consultation with your chosen IT professional taking into account all the of the relevant factors.